Appliance error code guides

Water is not entering the washer correctly.

The washer is not draining at the expected speed.

The door is not detected as closed and locked.

The laundry load is unbalanced inside the tub.

The washer detects extremely hot water at the cold-water inlet.

The washer has detected too much water in the tub.

A control-panel button is detected as stuck or continuously pressed.

The washer has detected an excessive-suds condition.

The washer is unable to drain water from the wash cycle.

Water did not fill the tub to an adequate level in time.

The washer door or drawer was not detected as closed and locked.

The washer could not balance the laundry load for spinning.

The dishwasher detected a drain issue.

The dishwasher is not draining properly.

The dishwasher water level is too low or water is not entering correctly.

The dishwasher filter is blocked.

The drain pump is blocked or its cover is loose or missing.

The washer is taking too long to drain.

The washer door is not locking properly.

The freezer fan is not providing the expected rotation feedback.

The refrigerator compartment fan is not operating normally.

A Family Hub software-related notification requires confirmation.

Family Hub detected a low-voltage event at the power source.

The refrigerator detected a power, voltage, compressor-current, or startup communication anomaly.

Demo or display mode is active, so refrigerator and freezer cooling are disabled.

A door gap or an object is preventing a refrigerator door from closing correctly.

The refrigerator did not reach the expected evaporator temperature during defrost within one hour.

The refrigerator detected an ice-maker water-flow sensor error or low water pressure.

The refrigerator detected a problem with the ice-maker fan.